Helion Ares Spidex 3D RTF [VIDEO]

Helion Ares Spidex 3D RTF [VIDEO]

From Helion:

The Spidex 3D outperforms all other quads in its class. With just the click of a button you can go from normal to inverted flight and the software makes flying inverted easy by automatically adjusting the controls so you can fly with the same stick movements as you would in normal mode.

3 Flying Rates

Three different rates of 20%, 60%, and 100% allow the Spidex 3D more maneuverability with each step so you can expand the capabilities of your quad as your flying skills grow.

6-axis control

The 6-axis control system in the Spidex 3D helps provide the steady control you need while learning.

Great Visibility

The Spidex 3D comes in your choice of two brightly colored trim schemes with matching LED’s that provide easy orientation in flight. Plus, the translucent finish on both color canopies allows LED light to shine through so you have the visibility you need to enjoy 3D flying fun in the dark!

The Spidex 3D Story

Ares Spidex 3D Ultra-Micro RTF Quad

When you’re ready to try inverted flight, just the click of a button flips you from normal to inverted flight and the advanced flight software makes flying inverted easy by automatically adjusting the controls so you can fly with the same stick movements inverted as you would in normal flight. And switching from 180° flips to 360° flips is as simple as another click of a button. Once you’re comfortable with basic flight, the push of a button on your transmitter will allow your Spidex to complete 180° flips allowing you to fly inverted. Switching from 180° flips to 360° flips is as simple as another button click.

The Spidex 3D comes in your choice of two brightly colored trim schemes with matching LEDs that help provide easy orientation in flight. Plus, the translucent finish on both color canopies allows LED light to shine through so you have the visibility you need to enjoy 3D flying fun in the dark! The Spidex comes in your choice of two bright fluorescent trim schemes that provide easy orientation, plus LED lights that help with visibility when flying in the dark. Plus, once you’re comfortable with basic flight, the push of a button on your transmitter will allow your Spidex to complete 360-degree flips in any direction!

The Spidex 3D is RTF (Ready-To-Fly), so it arrives 100% factory-assembled with nearly everything needed to fly included in the box. You get a 2.4GHz 4-channel transmitter, a 300mAh 1-cell 22C LiPo battery, and a USB charger for convenient charging. All you need to add are AA batteries to power the transmitter, and you can be hovering on the ceiling just minutes after opening the box!

Specs:

Diagonal length (Motor shaft – Motor shaft): 99.15mm
Diagonal length (Perimeter guard): 170.40mm
Rotor Diameter: 50.25mm
Height: 44.5mm
Weight: 32 grams
Battery: 1S 300mAh 3.7V 22C LiPo
Charger: 1S 3.7V 500mA USB
Transmitter: 4-channel 2.4GHz
On Board Electronics: 4-in-1 receiver/4 ESCs/mixer/6-axis control system

What’s in the Box:

  • 100% pre-assembled Spidex 3D airframe
  • 2.4GHz 4-channel transmitter
  • 300mAh 1S 3.7V 22C Lipo battery
  • 1S 3.7V 500mA USB
  • Extra set of gimbal stick ends (2)
  • Extra set of blades (4)

[wzslider]

Updated: December 1, 2015 — 3:03 pm

Leave a Reply

Your email address will not be published. Required fields are marked *

Air Age Media ©
WordPress Video Lightbox Plugin
RotorDrone